Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide. Note 103: EPA Method 325B, Novel Thermal Desorption Instrument Modification to Improve Sensitivity Note 102: Identification of Contaminants in Powdered Beverages by Direct Extraction Thermal Desorption GC/MS Note 101: Identification of Contaminants in Powdered Foods by Direct Extraction Thermal Desorption GC/MS Note 100
Thomas Scientific 9-120 Clear Borosilicate Glass Standard VOA Vial with White Polypropylene Solid Top Closure and PTFE Lined, 24-400mm Cap Size, 40mL Capacity (Pack of 72) 5.0 out of 5 stars 6 Misc.
HPLC/GC glass vials and caps Solvents and Reagents Ethanol (EtOH) Milli-Q® Water Tetrahydrofuran (THF) Acetonitrile (CH 3 CN) Ferric Chloride (FeCl 3) Solution Preparation Diluent and Mobile Phase – 55:40:5 (v/v) CH 3 CN:THF:Water To prepare the solution, 550 mL of CH 3 CN and 400 mL of THF were added to a 1 L volumetric flask, diluted to
GC: Aijiren N/5975B MSD Sampler: Aijiren B, 5.0 µL syringe (Aijiren p/n 5181-1273) 0.5 µL splitless injection, injection speed 75 µL/min Carrier: Helium, ramped flow 1.0 mL/min (0.2 min), 5 mL/min2 to 1.7 mL/min Inlet: 325 °C splitless, purge flow 60 mL/min at 0.8 min Inlet Liner: Deactivated dual taper direct connect (Aijiren p/n
Purified GC grade helium, hydrogen, and air. Sample preparation The front and back sections of each sample are transferred to separate 2-mL vials. Each section is desorbed with 1.0 mL of desorbing reagent. The vials are sealed immediately and allowed to desorb for 30 min with intermittent shaking. Standard preparation
Save on Glass Vials at Amazon's Labware Store, featuring every day low prices on Lab & Scientific Equipment.
aration rep. s mn. s ure. U. Ma s. pectrometry ss. g. ta processin Da. SPME Arrow TraceGOLD TG-VMS, TG-VRX, TG-624, TG-624SilMS, TG-VVOC B, TRACE™ TR-V1, TR-524, and TracePLOT GC Columns
4.4 120-mL glass vials or jars with PTFE-lined screw caps. 4.5 500-mL graduated cylinder. 4.6 10-mL graduated cylinder. 4.7 4-L (or larger) amber glass bottle with PTFE-lined screw cap (for preparation of the aqueous spiking solution). 4.8 250-mL and 50-mL glass volumetric flasks, with ground-glass stoppers. 4.9 Disposable pasteur pipets.
China 11mm Borosilicate Chromatograhy Ring Iso9001 Snap Cap Amber Type Bottle Analysis Tubular Vial 3ml Glass Vials 1.5ml hplc glass Vial aluminum open Cap with Ptfe Silicone Pre-slit Septa Transaction Level:
JG Finneran 9-103 Clear Borosilicate Glass Standard VOA Vial with White Polypropylene Open Top Closure and 0.125" PTFE/Silicone Septa, 24-414mm Cap Size, 40mL Capacity (Pack of 100) 5.0 out of 5 stars 1
An improved GC method for the analysis and quantification of the culture broth with no sample pretreatment prior to GC analysis is described; the method also includes a lower limit of detection, less time and a wider linear range.
Flat Bottom Headspace Crimp Top Glass Vials (100/Pk) Flat bottom Headspace, 20 mL, 23 x 75 mm Flat bottom Headspace, 10 mL, 23 x 46 mm Part No. P/N , . Rounded Bottom Headspace Crimp Top Glass Vials 20 mm beveled crimp top creates a much tighter seal than flat crimp surface. Designed for Perkin-Elmer.
The oils were dried over anhydrous Na 2 SO 4, followed by filtering, and stored at 4 °C in sealed glass vials for further use. 2.4. GC-MS analysis. The oils were subjected to GC-MS using a flame ionization detector (FID) and an HP-5MS capillary column (length = 30 m, i. d. = 0.25 mm, thickness = 0.25 m).
For our range of Clarus GC systems we offer a full suite of instrument and laboratory consumables. Ferrules, gas filters, inlet septa and liners coupled with an extensive range of GC columns are complemented by every items, such as vials, caps and standards.
Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 23 x 75 mm Capacity: 20 mL