transparent 18mm 5.0 borosilicate glass gc vials with neck long for GC/MS Thermo Fisher

Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials

BOROFLOAT ® has practically the same glass composition as DURAN ®, which is also a SCHOTT glass product mainly used for laboratory equipment.Consequently, the glass is very resistant against water, neutral, saline, acidic solutions, and to iodine, chlorine, bromine, and organic substances, even over long periods and at temperatures higher than 100 °C.

Headspace-Vials ND20 (5ml and 10ml) Product Specification: Capacity: 10.00ml o.d. x Height: 20.0 x 54.5mm Colour: amber Form: flat bottom flat DIN crimp neck For

Good for normal service where one surface is heated to a maximum temperature of 446°F (230°C), using 1/4" or thicker glass. The temperature difference between ambient and process should not exceed 150°F. Tempered Borosilicate - Clear Recommended for use where higher pressures are required than can be obtained with Annealed Borosilicate.

3.5.11 LC/MS and GC/MS Certified Vial KITs (Short Thread Vials and Short Thread Seals ND9) 3.6 Short Thread Vials ND9, wide opening with pre-screwed PP Short Thread Seals ND9 and/or pre-assembled Micro-Inserts with wide opening 3.7 Special 2in1 KITs 4. Screw Neck ND10 27 4.1 Screw Neck Vials ND10, wide opening, 10-425 thread

Fisher Scientific - Guldensporenpark 26 - 9820 Merelbeke - Belgium Tel. 056 260 260 - Fax. 056 260 270 - be.fisher@thermofisher.com S.R.L. au capital de EUR 18 550, RCS Bruxelles 667572, N° TVA :

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

pared with non­alkaline earth borosilicate glass), which have thermal expansion of between 4.0 –5.0 x –610 /K, be­ long the chemically highly resistant varieties FIOLAX® 8412 and 8414 (“neutral glasses”), and SUPRAX® and 8488. High-borate borosilicate glasses Galsses contanini g 15 – 25 % B 2 O 3, 65 – 70 % SOi 2, and smaller

Clear Glass Vials. Clear Borosilicate Glass Screw Thread Sample Vials and crimp top glass vials offer protection against temperature changes and preserve sample integrity.These general purpose lab quality glass vials are made of Type I borosilicate glass, providing exceptional resistance to heat shock and chemical leaching.

Vial, Vial Style Chromatography, Labware Capacity - Metric 2 mL, Labware Height - Metric 32 mm, Labware Inside Dia. - Metric 12 mm, Labware Screw Closure Size 9-425mm, Includes Closure No, Labware Body Material Borosilicate Glass, Labware Clarity Colored, Autoclavable Autoclavable, Sterile/Non-Sterile Non-Sterile, Glassware Class B, Package Quantity 100

Snap Top Vial (1) Standard Glass Vial (3) Storage tube (1) Threaded Vial (1) Tooled Neck Vial (1) Transport Tube (2) Transport Vial (2) Ultra Clean Vial (1) Unassembled (1) Uni-Dose™ Vial (1) Urine Collection Tube (1) Vacule Ampule (2) Vial (4) Vial

Thermometers. Check the temperatures of liquids, air/gas, semisolids, or equipment with thermometers that offer simultaneous readings and visual and audio alarms.

Made of clear type 1 borosilicate glass, Our screw thread vials are designed with a continuous thread “CT” finish, permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes, and packaged in attractive, white low-particulate cardboard boxes.

Thermo Scientific™ National 13mm Autosampler Vial Inserts are made of clear Type 1 Class A borosilicate glass and available in two configurations for use with HPLC or GC autosamplers. Usable volumes range from 350μL to 850μL. [Bullet] Conical inserts offer a low residual volume of less than 8μL.