Standard Opening 20ml white with flat bottom for analysis instrument manufacturer

The 20mL Scintillation Vial has multiple uses in scintillation counting, gamma counting, chromatography, sample storage and culturing. Because of its leak-tight cap it is also commonly used to store and transport histological specimens in 10% formalin.

All vials are Type 1 borosilicate glass and the range is extensive enough to cover all major manufacturer’s instruments, including Shimadzu, Aijiren, PE, CTC and Tekmar headspace instruments. Vials are available in 10 and 20ml sizes with either round or flat-bottom profile.

Centrifuge tube without cap for ABI-310 instrument capacity 0.5 mL Greiner round bottom tubes, polystyrene test tube, 20 mL, 16 x 152 mm, polystrene, round (U ...

A: The unique round well bottom design of the Corning spheroid microplate generates single, uni-form spheroids, that are centered in each well. This technology is a reliable tool for 3D screening. Flat bottom wells generate multiple, non-uniform sized spheroids that are not evenly distributed and lack reproducibility across wells.

Available in 6, 10, and 20 ml sizes in the headspace vials. Use a standard vial to ensure adequate headspace, and this must be achieved at a standard ratio, which must of course be a sample that is not over-diluted. Usually the reserved capacity after comparison should be at least 50% of the sample volume

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom

Southern Labware offers a complete line of glass flasks for all your laboratory requirements. Our glass volumetric flasks feature a durable machine blown body and a heavy beaded neck with a sharp graduation line.

Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials (2714Q19, Q20) 20 mm beveled crimp top creates much tighter seal

When designing the bottle bottom you can choose between the following bottoms: flat bottom, rounded bottom (HS bottom), round bottom, conical bottom, solid glass bottom and a microliter bottle with inner cone. In the following excerpt from our current catalog you will find an overview of the most important bottle types listed above:

Thermo Scientific Sun SRi. Crimp top headspace vials feature a standard 20mm finish Round bottom vials are compatible with most autosamplers Flat bottom vials are preferred for manual headspace autosamplers Select amber glass vials for light sensitive samples. Related Products: Glass Vial 10ml. Compare this item.

Shop a large selection of Autosampler Vial Inserts products and learn more about Thermo Scientific SUN-SRi Standard Opening/StepVial II Inserts Insert, Insert, Size: 0.20mL,

rounded or flat bottom profiles for accurate instrument compatibility. Flat bottom vials have a greater stability; round bottom vials are best for autosamplers that physically move the vials and can reduce positioning errors. The KX range offers 20ml volume vials to fit CTC, Aijiren and PE autosamplers. Introduction Kinesis KX vials are the

Chrom Tech. Chrom Tech offers our own high quality products at a great value for our customers. Our vials, plates, filtration products, and other chromatography consumables offer all customers affordable, superior products for standard and automated chromatography applications.

Flat bottom headspace vial, 10 mL, 23 x 46 mm 27198 — Flat bottom headspace vial, 20 mL, 23 x 75 mm 27199 — Crimp seal open center (20 mm), PTFE white/silicone beige 27362 27375 Crimp seal pressure release (20 mm), PTFE/silicone 27455-U — Aluminum cap plain, 10 mm center hole, SU860011 — Pharma-Fix septum, 3.0 mm Aijiren Inlet Liners

4.4.1.2 Instruments and equipment 4.4.1.2.1 Flat bottom weighing bottle 50mm×30mm. 4.4.1.2.2 Constant temperature drying oven. 4.4.1.3 Analysis steps Spread about 5g of the sample evenly in a pre-dried flat-bottomed weighing bottle of known mass, cover the cap, and weigh to the nearest 0.0002g;