2ml Amber Lab Vials GC Vials Snap Cap Vials ND11 info@mastelf.com 2020-01-02T18:32:22+08:00 2ml Plastic Sample Vials Screw Top Vials info@mastelf.com 2020-01-02T18:32:48+08:00 Glass Vials with Caps, PTFE Silicone Septa ND8 info@mastelf.com 2020-01-02T18:35:21+08:00
Kinesis is a leading international supplier of chromatography, liquid handling, sample storage and medicinal chemistry consumables and equipment. The ability to work directly with leading manufacturers enables us to offer very competitive pricing while ensuring that you, the customer, never have to compromise on quality, support or service.
Search results for gc ms vials at Sigma-Aldrich. Compare Products: Select up to 4 products. *Please select more than one item to compare
7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren 6850 autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and 7683 autosamplers.
Features. Superior quality 1st hydrolytic class glass (Type 1) in clear and amber, meets all requirements of Pharm. US, EU, JPN; Round bottom vials are compatible with most autosamplers and more easily handled by robotic arms that lift the vial from the tray
All MS Analyzed Vial Kits are: Shipped with lot-specific Certificate of Analysis including MS traces Lot tested by both GC/MS and LC/MS Manufactured for full-warranted Compare this item 2 mL, 9 mm (certified), Screw Top Vial with PTFE/Silicone Closure-Kit
Search results for vials at Sigma-Aldrich. Certified QSertVial ™ (vial with fused-in insert) kit, screw thread, 12 x 32 mm, 0.3 mL, pkg of 100. 4 Product Results
Glass vials are produced from Type 1 borosilicate glass tubing (clear glass from 33 expansion glass, amber glass from 51 expansion glass); while our polypropylene vials are manufactured from virgin resins to eliminate the possibility of sample contamination. Septa The PTFE/silicone septa are manufactured, conditioned and then tested by GC/MS to
18mm Screw GC Headspace Vial is common element for each GC instrument. Sample handling in the overhead space is a convenient and fast sample pretreatment method in gas chromatography. In headspace analysis, the selection of sample vial is also critical.
Apr 01, 2017 · To determine concentrations of PG, SA and BA in three wine samples (white semi-dry, red semi-sweet, red dessert) using SPME-GC–MS, the standard addition method was used. Samples were prepared by adding 50 μL of a standard solution of analytes to 450 μL of both red and white wines in a 20-mL screw cap vial (Supelco, Bellefonte, PA). Standard
Compatible with all 9 mm screw-thread vials. Molded, 10-mil, solid pierceable cap. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection.
18mm Magnetic Headspace Screw Cap for SPME with PTFE/Silicone Septa, 100pk
5.2.3.4 Sample vials: Amber glass, 1- to 3-mL with PTFE-lined screw- or crimp-cap, to fit GC autosampler. 5.3 Gas Chromatograph (GC): Analytical system with split injection, capillary column, temperature program with initial and final isothermal holds, and all required
Search results for GC vials caps at Sigma-Aldrich. WHEATON ® amber sample vial with PTFE faced rubber lined cap packed in partitioned tray. 5 Product Results
This paper describes a simple and quick method for sampling and also for carrying out the preconcentration of pesticides in environmental water matrices using two-phased hollow fiber liquid phase microextraction (HF-LPME). Factors such as extraction mode, time, solvents, agitation, and salt addition were investigated in order to validate the LPME method. The following conditions were selected
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack