This application demonstrates the use of the PerkinElmer Clarus® SQ 8 GC/MS to quantify three regulated phthalates (DBP, BBP, and DEHP), along with other common phthalates (DMP, DEP, and DnOP) with high sensitivity and repeatability based on Regulation EU No. 10/2011. The Clarus SQ 8 system was operated in Selected Ion Full Ion (SIFI™) MS
Gc Ms Vials found in: Mass Spec Certified Vial Kits, 2 mL, 9 mm (certified), Screw Top Vial with PTFE/Silicone Closure-Kit, MS Analyzed Vial Kits, EPA..
7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren 6850 autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and 7683 autosamplers.
May 17, 2013 · Following ASTM D3612 I have calibrated the GC using calibration gas purged vials at 3 different levels. I have found at gas that the GC is repeatable. However when testing gas-in-oil samples I have found that the unit reads typically 20-50% lower (depending on gas) than expected.
Aug 30, 2019 · The second measure was to reduce the water effect in GC/MS analysis by the use of a novel syringe washing solution with a constant removal of moisture by CaH 2. For any GC/MS instrument in ordinary laboratory use, this washing solution could ensure a dry injection syringe. 3.2.2. Sensitivity of DMSD by GC/MS
3 and 5mL Reacti-Vials, 40mL Screw Cap Septum Vials (1) 4 mL Screw Thread Vials (1) 40-100 mL Vials (1) 4mL Vials (2) 60 and 100 position vials trays for PerkinElmer autosamplers (1) 7 mL Screw Cap Septum Vials (1) 8 x 40mm Shell Vials (1) 8-425 Standard Opening Vials (1) 8-425 Standard Opening Vials; Flanged for Shimadzu (1) 8-425 Standard
Headspace Crimp-top Vials and Pre-assembled Caps 20 mL Glass, OD 23 mm x H 75.5 mm Round Bottom Vials*** Description Pkg Part No. 6 mL Headspace Clear Glass Vial* ** 125 N9302134 Low-Volume Vial Adapter for 6 mL Vial 10 N6120110 20 mL Headspace Clear Crimp Glass Vial with P Logo 1000 B0104236
Choose from these economical alternanatives to glass vials. These 8mm plastic standard opening screw thread vials are manufactured from high-quality, GC-tested polypropylene material and feature an 8-425 finish. Choose from Thermo Scientific™, Thermo Scientific™ National™, and Thermo Scientific™ Chromacol™ brands.
Perkin Elmer compatible; Thermo Scientific (VG) compatible; Other Manufacturers; ICP-MS Multipliers; GC VIALS. 2ml 8-425 Clear Glass Sample Vials HPLC Vials ND8; 2ml 9mm Screw Thread Vials ND 9; 2ml Snap Cap Vials ND 11; 2ml Crimp Cap Vials ND 11; 4ML Screw Top Vials ND 13; Headspace Vial Screw ND 18; Headspace Vial Crimp ND 20; Glass Sample
Simplest split liner, glass wool, no-deactivation, large volume, 990 µ L volume. Use for general purpose applications for compounds with low glass adsorption activity. Also used for Splitless mode. 5183-4647 Glass wool (held near needle entrance to remove residual sample on needle), deactivated, 870 µ L volume. Glass nub ensures that
Compatible with a broad variety of autosamplers, these Thermo Scientific 8mm Clear Glass Screw Thread Vials have a 8-425 thread finish. While maintaining the standard outer dimensions the internal volumes of these vials range from below 300L to 2mL.
CPI International offers a wide range of supplies for gas chromatography (GC) and GC-mass spectrometry (MS). Our line of GC/GC-MS supplies includes PID lamps, electron multipliers and filaments, and standards. These parts are compatible with many brands in the industry including Aijiren, PerkinElmer, Varian, and Thermo Scientific.
The auto sampler for the GC–MS system equipped with SPME Carboxen-PDMS coated (75 µm) fiber was purchased from Gerstel (Gerstel, GmbH & Co. KG, Germany). For the sample preparation, 20-mL HS glass vials (Perkin Elmer, Shelton, CT) were used. Gas tight syringes were bought from Hamilton (Hamilton, Reno, NV).
Vials, screw top with solid green Thermoset cap with PTFE liner, preassembled, pkg of 100 volume 4 mL, clear glass vial, O.D. × H 15 mm × 45 mm, thread for 13-425; Synonym: PK100 4ML CLEAR VIAL,SCREW TOP,SOLID CAP W/PTFE LINER; find Supelco-27138 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
The Chromatography Direct range of 20mm Crimp Top Headspace Vials and Caps are available in 20ml Amber and Clear, 10ml and 6ml in a variety of flat and round bottom – suitable for CTC, Perkin Elmer an
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack