Product # Description. Add to Cart. 29391-U: Certified QSertVial ™ (vial with fused-in insert) kit, screw thread, 12 x 32 mm, 0.3 mL, pkg of 100 clear glass vial, PTFE/silicone septum (bonded), thread for 9 mm
9mm Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.
Each of the vials is washed in non-phosphate detergent and rinsed three times with tap water and ASTM Type 1 organic-free water to remove detergent. After being cleaned, the product is assembled with Type 1 borosilicate glass vials, PTFE/silicone septa, and open-top polypropylene caps. The vials are available in either clear or amber glass.
Glass Screw Thread Vials for CombiPal Headspace. Chrom Tech screw threada headspace vials are available in clear or amber glass and in either flat or round bottom styles, and are popular for customers using Combipal Headspace autosamplers. Our headspace closures are available in pre-assembled caps with septa or can be ordered separately.
TruView LCMS Certified Vials TruView autosampler vials minimize sample loss for MS, LC, and GC.. For liquid and gass chromatography and mass spec applications with sample concentration of ≤1 ng/mL, TruView LCMS Certified Vials are the best choice for scientists, combining neutral glass for low adsorption of small molecules with very few background masses detected by MS.
The Quattro Micro GC™ Standards Kit is intended to assess the performance of the Quattro Micro QC system. This kit is designed for use by a Waters certified engineer or user as part of a performance maintenance or qualification activity.
Aijiren vial kit, for Waters, includes screw top vial (12 x 32 mm), 2 mL, 9 mm, clear, write-on spot, cap (12 mm) with preslit PTFE/silicone septa, similar to Waters 186000307C, National Scientific C4000-95W, Chromacol MEL, La-Pha-Pack 11 23 1051, 100/pk
of a screw cap vial with the integrity of a crimp vial, I-D™ vials have write-on patches graduated at 0.5, 1.0 and 1.5 ml. Also compatible with Perkin-Elmer, Shimadzu and Varian GC and LC autosamplers and Waters, Hitachi and Beckman LC autosamplers.
Our portfolio consists of GC vials and LC vials, GC caps and LC caps, and GC septa and LC septa. Through our biological line, we offer glass and plastic vials for optimal measurement of samples by liquid scintillation counting. Our glass vials are chemically-inert, making them suitable for use with aggressive reagents and solubilizers.
The Certified Vial Kits are fully lot-tested including HPLC and GC analysis for 15 critical parameters. The certificate of Conformance is included in every pack. See all Certified & MS Certified vials & closures .
Gc Ms Vials found in: Mass Spec Certified Vial Kits, 2 mL, 9 mm (certified), Screw Top Vial with PTFE/Silicone Closure-Kit, MS Analyzed Vial Kits, EPA..
2.0 mL Big Mouth Step Design Screw-Thread Vials, 12 x 32 mm, 10 mm/425 Thread (vial only) 40% larger opening than other vials. Step profile automatically centers glass flange limited volume inserts.
7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren 6850 autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and 7683 autosamplers.
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
Polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come in snap, crimp, or screw styles and can contain sample volumes up to 700 µL while leaving minimum residual volumes of less than 3 µL.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack