EPA vials are fabricated from KG-33 borosilicate glass. Amber EPA vials, for light sensitive solutions, are fabricated from amber 203 borosilicate glass. Open top closures and PFTE-faced silicone septa or solid top PFTE-faced white rubber-lined closures are available separately.

The following GC–MS conditions were used in the analysis. The samples (1 µL) were injected splitless into a GC–MS ( A/ ; Aijiren Technologies, Santa Clara, CA, USA) equipped with a capillary column (Zebron ZB-5MS, 15 m, 0.25 mm i.d., 0.25 µm; Phenomenex, Torrance, CA, USA), and run in selective ion mode.

(Ref. EPA Methods 601, 602, 603 and 604). Clear EPA vials are fabricated from KG-33 borosilicate glass. Amber EPA vials, for light sensitive solutions, are fabricated from amber 203 borosilicate glass. Open top closures and PFTE-faced silicone septa or solid top PFTE-faced white rubber-lined

Amber Glass Sample Vials with Teflon-Lined Storage Caps Packaged as 100 or 200 pack of shrink-wrapped amber glass sample vials, with Teflon-lined solid top storage caps in resealable plastic bags all in our handy container to keep items dust-free.

Our tubular vials product range includes clear and amber vials in glass types I, II and III from 0.6 to 100 ml. We produce different designs, with or without blowback, according to industry standards or to individual specifications.

High Temperature 10 ml Clear Glass headspace Vials, Flat Bottom, Beveled Finish, use for Different Lab Testing and Sampling in HPLC/GC/KF Analysis (Pack of 100) 5.0 out of 5 stars 1 $31.90

This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.

Gas chromatograph equipped with a flame photometric detector used in the sulfur mode. A GC column capable of separating methyl mercaptan from methylene chloride and any interferences. The column used for validation studies was: 10 ft x 1/8 in. stainless steel 20% SP2100, 0.1% CW 1500 on 80/100 Supelcoport.

traceable to SRM from NIST 5.0 mg/l TOC in H₂O; Supelco Certified clean borosilicate glass vials. ... amber glass vial, thread for 24-400 24-400, pkg of 100 ea ...

Vials of clear or amber borosilicate 100 mm, Geometry, Straight, Material, Borosilicate Glass, OD, 5.0 ... GC/MS Analysis of Melamine and Cyanuric Acid Below 1µg ...

Vials 8-425 Screw Top Glass Vials These 2 mL, 12 x 32 mm 8-425 vials accommodate a variety of autosamplers originally designed for narrow neck vials. Use with 8-425 screw caps. 8-425 Screw Top Glass Vials (100/Pk) Clear 8-425 screw top, 2 mL Amber 8-425 screw top, 2 mL Part No. P/N , . General Chromatography

In addition to high-quality GC columns, we also offer the most commonly needed GC items. Included are GC septa, inlet liners, inlet seals, ferrules, nuts, guard columns, connectors, flowmeters, hand tools, syringes, vials, and PID lamps, for several GC instruments (Aijiren/HP, PerkinElmer, Shimadzu, Thermo, and Varian). Pictures and technical specifications are presented for many of these

vials from the same lot of prepared samples were used for com-parative purposes for all five measurement techniques. For ex-ample, of the nearly 50 vials prepared at 5.0% oxygen levels, five were reserved for measurement for all five techniques ex-amined in the study. Measurement of relative vial-to-vial con-

Straight/SPME, Premium Deactivation, Borosilicate Glass 1.8 mm x 5.0 mm x 95 mm 5-pk. 23279 Topaz 1.8 mm ID Straight/SPME Inlet Liner for Thermo TRACE 1300/1310 GCs equipped with SSL inlets ID x OD x Length qty Similar to Part # cat.# Straight/SPME, Premium Deactivation, Borosilicate Glass 1.8 mm x 6.5 mm x 78.5 mm 5-pk. Thermo 453A0415-UI 23278

HPLC Vial Autosampler Vials 2ml with Caps, 9-425 Amber Vial with Blue Screw Caps,Writing Patch,Graduation,White PTFE & Red Silicone Septa Fit for LC Sampler(600 pcs,Brown) 4.0 out of 5 stars 9 $110.99